+- Punaweb Forum (http://punaweb.org/forum)
+-- Forum: Punaweb Forums (http://punaweb.org/forum/forumdisplay.php?fid=3)
+--- Forum: Building in Puna (http://punaweb.org/forum/forumdisplay.php?fid=12)
+--- Thread: Ohia logs (/showthread.php?tid=3301)
Pages:
1
2
Ohia logs - DanielP - 12-01-2007
3 years ago, when I did some clearing on my lot, I set aside some Ohia logs. I am wondering if there is anyone that has a mill that can cut these for lumber. Otherwise they will get cut up for firewood I guess.
Dan
RE: Ohia logs - janeadams - 12-01-2007
At the Makuu market a couple of weeks ago, there was a guy with some palms and a sign about logs and sawmill. I really don't know name or number or anything more...
Jane
RE: Ohia logs - emorata - 12-02-2007
i've been hearing pros and cons about keeping the outer skin intact vs skinning the skin ahead of time to keep the core from rapid deterioration.....does anyone have an idea about what is the better solution especially if you don't plan on using the wood for another year or so?
just in case anyone was wondering, some of the ohia's on my property are smaller and unfortunately right in the middle area where the pad is being placed so there's no way of saving them, but i would like to use them for various future uses.
thanks in advance,
noel
RE: Ohia logs - DanielP - 12-02-2007
Mahalo Jane. I will look.
Noel,
The smaller logs are easier to handle for sure and are good for many projects.
What I learned from some locals; They are easy to skin when freshly cut. If you cut a couple of 2" dia.X 18" long branches and beat the bark rapidly all over like playing a drum, this loosens the bark and it will peel off like a banana skin. It leaves the cambrium layer intact and seldom even needs sanding.
Stack them on stickers and cover with old roofing or a tarp, but allow air flow around them to prevent rot.
Dan
Edited by - DanielP on 12/02/2007 07:15:52
RE: Ohia logs - jerry - 12-02-2007
Noel,
If you strip the bark when you first cut the long it is easy. I use a pressure washer to cut a slice the length of the log and then peel off the bark.
If you wait it is a nightmare--almost impossible.
Store the logs off the ground in a dry area where they get air circulation and they will last ages.
Jerry
Art and Orchids B&B
http://www.artandorchids.com
RE: Ohia logs - emorata - 12-03-2007
thanks daniel and jerry for the information, i'll follow those directions.
best,
noel
RE: Ohia logs - Puna Kite Man - 12-03-2007
How long are your logs? Are you going to use them for building or sell them off? Otherwise I might have use for a few.
Thanks, Vince
RE: Ohia logs - DanielP - 12-03-2007
PKM,
My logs are 12-20', mostly 6-10" dia. They are too heavy to handle by hand. I have plenty of extras if you are in need.
Dan
RE: Ohia logs - Tropickid - 12-03-2007
We just bought a bandsaw sawmill and we are located here in Paradise Park-It can handle up to 32" diameter logs-not portable though-the logs need to be brought to the mill-thanks- Chuck (982-9730)
RE: Ohia logs - DanielP - 12-04-2007
Chuck,
I will call you and we can get together and talk some milling story.
Have you milled Ohia before?
If so, what have you learned?
Dan