03-22-2015, 01:20 PM
230 Volt Water Pump, Flotec fp4022-10, was bought new, installed but never used because electricity never got connected. We bought it for $300 and are asking $150. If you want it, I'm willing to meet you on the East Side somewhere.
Call, text, or email me: jenniferjangles@gmail.com 808-464-2015
Its in good condition and I can email you pictures.
DETAILS:
Body Construction: Thermoplastic
Horsepower: 3/4
Maximum Capacity: 12 GPM
Flow at 10' Lift and 40 PSI: 9.7 GPM
Max Lift: 25'
Maximum Pressure: 78 psi
Pressure Switch Setting: 30/50
Suction Pipe Size: 1-1/4" NPT
Discharge Pipe Size: 1" NPT
AMP Draw (full load): 6.1 amps on 230v / 12.2 amps on 115v
Voltage: 230v / 115v, 60 Hz
Recommended Breaker: 15 amp on 230v / 20 amp on 115v
Perfect for shallow wells (depth-to-water less than 25')
Thermoplastic construction for higher corrosion resistance
1-1/4" Suction / 1" Discharge
Comes with pre-wired 30/50 pressure switch
Call, text, or email me: jenniferjangles@gmail.com 808-464-2015
Its in good condition and I can email you pictures.
DETAILS:
Body Construction: Thermoplastic
Horsepower: 3/4
Maximum Capacity: 12 GPM
Flow at 10' Lift and 40 PSI: 9.7 GPM
Max Lift: 25'
Maximum Pressure: 78 psi
Pressure Switch Setting: 30/50
Suction Pipe Size: 1-1/4" NPT
Discharge Pipe Size: 1" NPT
AMP Draw (full load): 6.1 amps on 230v / 12.2 amps on 115v
Voltage: 230v / 115v, 60 Hz
Recommended Breaker: 15 amp on 230v / 20 amp on 115v
Perfect for shallow wells (depth-to-water less than 25')
Thermoplastic construction for higher corrosion resistance
1-1/4" Suction / 1" Discharge
Comes with pre-wired 30/50 pressure switch