09-20-2010, 12:54 PM
Hi Wayman:
Yes as you say putting the outside inside is helpful in speeding up the process. Secondly aeration is a factor. Turning allows oxygen to penetrate throughout which is important as well.
Andrew
Yes as you say putting the outside inside is helpful in speeding up the process. Secondly aeration is a factor. Turning allows oxygen to penetrate throughout which is important as well.
Andrew
quote:
Originally posted by Wayman
It was always my thought that the reason for turning was to allow the micro organisms that cause the heating to work their majic on all the material. Obviously, the outsides don't get a chance at action enough to cause them heating, so you turn it periodically. Is that a factor?
___________________________
Chinese curse "May you live in interesting times".
Chinese curse "May you live in interesting times".