Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Helicopter Protest for Puna
#7
You might want to read this:

§ 101.15 Notice requirements.

No person may operate an unshielded moored balloon or kite more than 150 feet above the surface of the earth unless, at least 24 hours before beginning the operation, he gives the following information to the FAA ATC facility that is nearest to the place of intended operation:

(a) The names and addresses of the owners and operators.

(b) The size of the balloon or the size and weight of the kite.

© The location of the operation.

(d) The height above the surface of the earth at which the balloon or kite is to be operated.

(e) The date, time, and duration of the operation.

§ 101.17 Lighting and marking requirements.

(a) No person may operate a moored balloon or kite, between sunset and sunrise unless the balloon or kite, and its mooring lines, are lighted so as to give a visual warning equal to that required for obstructions to air navigation in the FAA publication “Obstruction Marking and Lighting”.

(b) No person may operate a moored balloon or kite between sunrise and sunset unless its mooring lines have colored pennants or streamers attached at not more than 50 foot intervals beginning at 150 feet above the surface of the earth and visible for at least one mile.

(Sec. 6©, Department of Transportation Act (49 U.S.C. 1655©))

[Doc. No. 1580, 28 FR 6722, June 29, 1963, as amended by Amdt. 101–4, 39 FR 22252, June 21, 1974]
Reply


Messages In This Thread
Helicopter Protest for Puna - by Wao nahele kane - 07-24-2012, 03:43 PM
RE: Helicopter Protest for Puna - by csgray - 07-24-2012, 03:50 PM
RE: Helicopter Protest for Puna - by dmbwest - 07-24-2012, 04:25 PM
RE: Helicopter Protest for Puna - by bystander - 07-25-2012, 01:35 AM
RE: Helicopter Protest for Puna - by Obie - 07-25-2012, 03:05 AM
RE: Helicopter Protest for Puna - by DanielP - 07-25-2012, 03:44 AM
RE: Helicopter Protest for Puna - by rainshadow - 07-25-2012, 06:01 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)