01-20-2013, 03:44 AM
quote:
Originally posted by Andrew
We had our pump switch go ****y and I called the good people at Waterworks in Hilo who offered the following free advice. Take the switch cover off and apply a little WD40 to the switch mechanism. I did as they suggested and it fixed the problem we were having like a charm.
Unfortunately in my case the plate part of the switch mechanism broke off. I was able to temp fix it with duct tape- it got the pump running but didn't always tell it when to stop running. I was able to limp through the night charging the pressure tank manually until they opened up at 0900 to get a replacement switch.