10-23-2018, 03:37 AM
Section 25-5-31. Designation and density of RM districts.
(a) Each RM (multiple-family residential) district shall be designated on the zoning map by the symbol RM followed by a number which indicates the required land area, in thousands of square feet, for each dwelling unit or for each separate rentable unit in the case of boarding, rooming, or lodging houses, fraternity or sorority houses.
© The maximum density designation in the RM district shall be .75 or seven hundred fifty square feet of land area per dwelling unit or separate rentable unit.
Section 25-5-38. Other regulations.
(a) There may be more than one main building on any building site in the RM district.
(b) Distance between main buildings on the same building site in the RM district shall be at least fifteen feet.
© Plan approval shall be required for all new buildings and additions to existing buildings in the RM district, except for construction of one single-family dwelling and any accessory buildings per lot.
(d) Exceptions to the regulations for the RM district regarding heights, building site areas, building site average widths and yards, may be approved by the director within a planned unit development.
County can already approve a "tiny house subdivision" under existing codes. Note especially the part where a "planned unit development" may waive any requirements "at the discretion of the director".
Of course, if such a project were built by DOE, they could use their magical State powers to ignore all the County building and planning codes.
(a) Each RM (multiple-family residential) district shall be designated on the zoning map by the symbol RM followed by a number which indicates the required land area, in thousands of square feet, for each dwelling unit or for each separate rentable unit in the case of boarding, rooming, or lodging houses, fraternity or sorority houses.
© The maximum density designation in the RM district shall be .75 or seven hundred fifty square feet of land area per dwelling unit or separate rentable unit.
Section 25-5-38. Other regulations.
(a) There may be more than one main building on any building site in the RM district.
(b) Distance between main buildings on the same building site in the RM district shall be at least fifteen feet.
© Plan approval shall be required for all new buildings and additions to existing buildings in the RM district, except for construction of one single-family dwelling and any accessory buildings per lot.
(d) Exceptions to the regulations for the RM district regarding heights, building site areas, building site average widths and yards, may be approved by the director within a planned unit development.
County can already approve a "tiny house subdivision" under existing codes. Note especially the part where a "planned unit development" may waive any requirements "at the discretion of the director".
Of course, if such a project were built by DOE, they could use their magical State powers to ignore all the County building and planning codes.