12-31-2019, 05:34 AM
drill a hole about 12" deep, hammer in T-post
...after removing the flange with a small sledgehammer, and typically with "bigger" posts every 50-100' depending on terrain.
Two posts in an H-brace on either side of a gate and/or every so often (again, terrain) because you need something to pull against when stretching the fence.
Note that when renting the pneumatic drill/jackhammer, Puna Rentals will only give you 50' of hose, so access is a potential issue. Consider clearing the line with a small machine.
...after removing the flange with a small sledgehammer, and typically with "bigger" posts every 50-100' depending on terrain.
Two posts in an H-brace on either side of a gate and/or every so often (again, terrain) because you need something to pull against when stretching the fence.
Note that when renting the pneumatic drill/jackhammer, Puna Rentals will only give you 50' of hose, so access is a potential issue. Consider clearing the line with a small machine.