Posts: 8,471
Threads: 1,033
Joined: May 2003
To Adam79:
We are a bit starved for contractors here in East Hawaii on Castleblock projects. Primarily owner/builders here and that has left the generals out of the loop. I do have some contactors coming on line at this time though.
You are correct in that systems which are very doable by owner-builders should be very accessible to contractors.
We do provide on site assistance to clients, we need to make sure they get going in the right direction and complete successfully
Frankly, there are a lot of carpenter types who simply aren't interested in new methods. I don't much try to convince them - I have enough business with those that are interested. And for those who are interested we strive to give 110% attention.
Rob Tucker
Castleblock
Assume the best and ask questions.
Punaweb moderator
Posts: 325
Threads: 54
Joined: Jun 2007
Rob, how much are homes made with Castleblocks state of the art materials costing these days?
I know its a bit of an unfair question, but in general, what might the turnkey cost of a two-story, 2000 square foot home cost to design and have built by a contractor or project manager?
Posts: 8,471
Threads: 1,033
Joined: May 2003
A number of my clients are building for around $130 psf. Easy to spend more, possible to spend less.
Assume the best and ask questions.
Punaweb moderator
Posts: 325
Threads: 54
Joined: Jun 2007
Thanks. This info helps a lot!
Posts: 325
Threads: 54
Joined: Jun 2007
For completeness, here is another company to add to the list. They look similar to CastleBlock in their philosophy, approach and building strategy, but are further away (North Carolina).
http://www.deltechomes.com/
This one is like the multifacetted homes design, without wood:
https://www.deltechomes.com/photos.php?type=homes&model=wolcott
Edited by - hpp4me on 07/21/2007 07:48:17
Posts: 236
Threads: 51
Joined: Jul 2006
quote:
A number of my clients are building for around $130 psf. Easy to spend more, possible to spend less.
Rob,
The Castleblock Hokulea model meets several things I'm looking for, but how easy is it to move walls around? This particular model has four bedrooms, all about the same size. I'd want to have one larger master bedroom, one relatively large guest, and one other room that doubles as an office or small bedroom. So, with Castleblock, how easy is it to move the walls around?
Mahalo nui loa,
Brian and Mary
Lynnwood, WA\Discovery Harbour
Aloha pumehana,
Brian and Mary
Lynnwood, WA\Discovery Harbour
Posts: 8,471
Threads: 1,033
Joined: May 2003
The plans are quite flexible. We understand that it is difficult to ask four designs to meet everyone's needs.
If you want it different it can be different.
Rob Tucker
Castleblock
965-1555
Assume the best and ask questions.
Punaweb moderator
Posts: 325
Threads: 54
Joined: Jun 2007
Rob, on your website you have a product called Rumber, a wood substitute that stands up to hand granades, even. Could this (or another similar material) be used as a siding?
Put differently, if we wanted a home with the look of wood but made of new age materials like the ones you use, is that yet possible?
Posts: 315
Threads: 28
Joined: Oct 2006
emorata,
Thanks! Yes, our nursery is open to the public, Saturdays, by appointment. We are up in the woods, so want to be sure we're there when you'll come by. 808-250-1780
www.whitecloudnursery.com
Posts: 315
Threads: 28
Joined: Oct 2006
A word about contractors... it's not just carpenters who often don't want to learn something new. We had difficulty finding an electrical contractor who would work with both the Protec walls and our PV system. It all worked out in the end, but it was frustrating to find such a lack of interest in new tricks!
Jane
