Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Anybody use any of these? [inline water heaters]
#6
inline strainer - I use the mesh centered washers downstream of a 5 micron filter... .020 or .030 mesh (home depot - drip irrigation inline "mesh" and sealing washer combo really good - and cheap

I think the 5 L output on the light side.

5L = 5 liters (about 1.25 gallons) 20 degree rise per minute

10L = 10 liters (about 2.5 gallons) 20 degree rise per minute

even the 10L is 20 minutes to fill a bath tub - I would not use an L5 in a laundry application....

Reply


Messages In This Thread
RE: Anybody use any of these? [inline water heaters] - by Bullwinkle - 10-11-2012, 05:09 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)