Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Land Clearing
#14
Hi Alpogi8. I have not done much, as it was not easy for me to clear the ferns without some heavy duty equipment. I sprayed with some environmentally friendly weed killer (heavy dose) but it will require several more applications. I am changing my plans a little. I am just going to either scrape or rip a 100 foot driveway and an another 100X100 foot area for the house and landscape. Befoere I could do that last time, I had to head on back to the main land. I am coming back in August to do the scraping/clearing.

At this point I am debating if I should jus hire a company that does land clearing or shoud rent me a Bobcat and do it myself. I have walked the land and it is extremely flat. Mater of fact, I am going to ask our friends on this forum if they would recommend a company that is good, reasonable and reliable for land clearing/ripping/scraping work.

Thank you.

Kumarsah
Kumarsah
Reply


Messages In This Thread
Land Clearing - by kumarsah - 04-16-2017, 03:49 AM
RE: Land Clearing - by Kenney - 04-16-2017, 05:53 AM
RE: Land Clearing - by Chunkster - 04-16-2017, 06:53 AM
RE: Land Clearing - by kumarsah - 04-16-2017, 07:02 AM
RE: Land Clearing - by kalakoa - 04-16-2017, 07:05 AM
RE: Land Clearing - by Kenney - 04-16-2017, 08:08 AM
RE: Land Clearing - by kalakoa - 04-16-2017, 08:30 AM
RE: Land Clearing - by Chas - 04-16-2017, 10:54 AM
RE: Land Clearing - by BillyB - 04-16-2017, 12:00 PM
RE: Land Clearing - by kumarsah - 04-17-2017, 03:11 AM
RE: Land Clearing - by Thronester - 04-17-2017, 10:59 AM
RE: Land Clearing - by Chas - 04-17-2017, 12:44 PM
RE: Land Clearing - by Alpogi8 - 04-10-2018, 08:48 AM
RE: Land Clearing - by kumarsah - 04-28-2018, 12:20 PM
RE: Land Clearing - by Kenney - 04-29-2018, 09:59 AM
RE: Land Clearing - by kalakoa - 04-29-2018, 01:01 PM
RE: Land Clearing - by kumarsah - 04-29-2018, 04:40 PM
RE: Land Clearing - by aklb43 - 10-04-2018, 09:05 AM
RE: Land Clearing - by PunaDave - 10-16-2018, 03:00 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)