02-20-2023, 11:58 PM
I had success with a big SDS MAX rotohammer/rock drill and an 1-3/8”x18” drill bit. I would drill down about 12-16” depending on the topography and slam them in with a post driver by hand. Some times the rock would break up or the t post would pull out so I sprinkled dry cement around the post and it was nice and sturdy by the next morning. Not sure where you are but this was in lower HPP and all blue rock.
HARD work but it saved me quite a bit of money. Otherwise I couldn’t afford to do it.
As for septic an excavator with a big hammer will do the trick. Septic install must be done by a licensed contractor. I used excavationtech. Stanley did a great job
Hope that helps.
Aloha
HARD work but it saved me quite a bit of money. Otherwise I couldn’t afford to do it.
As for septic an excavator with a big hammer will do the trick. Septic install must be done by a licensed contractor. I used excavationtech. Stanley did a great job
Hope that helps.
Aloha