Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Building Codes...
#11
I remember talking to someone on this board and this sticks in my mind.
The current version of the UBC will automatically become code (statewide) 18 months after being published unless adopted earlier. Each County can adopt the latest revisions anytime after being published but at the 18 month mark, it becomes automatic.
Reply


Messages In This Thread
Building Codes... - by soulrebel - 03-26-2008, 09:29 AM
RE: Building Codes... - by John S. Rabi - 03-26-2008, 10:43 AM
RE: Building Codes... - by waynesb - 03-26-2008, 11:18 AM
RE: Building Codes... - by David M - 03-26-2008, 03:39 PM
RE: Building Codes... - by Carey - 03-26-2008, 05:45 PM
RE: Building Codes... - by Hotzcatz - 03-26-2008, 06:14 PM
RE: Building Codes... - by jdirgo - 03-27-2008, 06:18 AM
RE: Building Codes... - by John S. Rabi - 03-27-2008, 09:29 AM
RE: Building Codes... - by Kapohocat - 03-27-2008, 10:15 AM
RE: Building Codes... - by StillHope - 03-27-2008, 11:05 AM
RE: Building Codes... - by Bob Orts - 03-27-2008, 12:40 PM
RE: Building Codes... - by rusty h - 03-27-2008, 02:09 PM
RE: Building Codes... - by soulrebel - 03-27-2008, 02:19 PM
RE: Building Codes... - by waynesb - 03-27-2008, 06:20 PM
RE: Building Codes... - by soulrebel - 03-27-2008, 06:50 PM
RE: Building Codes... - by waynesb - 03-28-2008, 05:33 PM
RE: Building Codes... - by kani-lehua - 03-29-2008, 06:51 AM
RE: Building Codes... - by Hotzcatz - 03-29-2008, 04:57 PM
RE: Building Codes... - by John S. Rabi - 03-29-2008, 05:12 PM
RE: Building Codes... - by waynesb - 03-29-2008, 06:45 PM
RE: Building Codes... - by csgray - 03-29-2008, 07:06 PM
RE: Building Codes... - by kani-lehua - 03-30-2008, 08:38 AM
RE: Building Codes... - by waynesb - 03-30-2008, 04:20 PM
RE: Building Codes... - by rusty h - 03-31-2008, 02:41 AM
RE: Building Codes... - by John S. Rabi - 03-31-2008, 04:23 AM
RE: Building Codes... - by kani-lehua - 03-31-2008, 06:33 AM
RE: Building Codes... - by kohalakat - 03-31-2008, 07:53 AM

Forum Jump:


Users browsing this thread: 7 Guest(s)