Bathtub drain mechanism failure - help needed
|
Bathtub drain mechanism failure - help needed
|
12-17-2009, 11:03 AM
Kathy, it does sound like it's a gunk issue, so Obie's advice is good. It might also be a problem with the spring on the flipper. You can buy just a new flipper plate and see if that fixes it. If you need to replace the whole shebang, you can get a replacement at Home Depot or any hardware store and just pull the old one out and slide a new one in. In any case, the repair should be pretty manageable.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Bathtub drain mechanism failure - help needed - by Guest - 12-16-2009, 03:39 PM
RE: Bathtub drain mechanism failure - help needed - by hooligal - 12-16-2009, 03:45 PM
RE: Bathtub drain mechanism failure - help needed - by David M - 12-16-2009, 05:09 PM
RE: Bathtub drain mechanism failure - help needed - by David M - 12-16-2009, 07:41 PM
RE: Bathtub drain mechanism failure - help needed - by KeaauRich - 12-16-2009, 08:22 PM
RE: Bathtub drain mechanism failure - help needed - by Carey - 12-17-2009, 04:26 AM
RE: Bathtub drain mechanism failure - help needed - by Obie - 12-17-2009, 10:00 AM
RE: Bathtub drain mechanism failure - help needed - by KeaauRich - 12-17-2009, 11:03 AM
RE: Bathtub drain mechanism failure - help needed - by Obie - 12-18-2009, 08:26 AM
RE: Bathtub drain mechanism failure - help needed - by Wao nahele kane - 12-18-2009, 08:41 AM
RE: Bathtub drain mechanism failure - help needed - by Wao nahele kane - 12-19-2009, 05:16 AM
|
