07-07-2022, 04:34 PM
Note that the "stuttering" wears the pressure switch down pretty fast. Burned out the built-in on a Shurflo this way.
burning smell in pump room
|
07-07-2022, 04:34 PM
Note that the "stuttering" wears the pressure switch down pretty fast. Burned out the built-in on a Shurflo this way.
07-08-2022, 03:44 AM
I was worried the stuttering was going to speed up the demise of some component.
07-08-2022, 04:48 AM
If your system has a bladder tank be sure to check for proper air pre-charge:
https://www.rcworst.com/blog/How-to-Chec...ssure-Tank
Pua`a
S. FL Big Islander to be.
07-11-2022, 06:45 PM
The "points" sets on the pressure switch can be filed with a thin points file as used on older cars using ignition Proints. They can become pitted and even stick together. I have done this 2-3 times over almost eleven years now. And,our switch was pretty old when we bought the house. I have had to adjust our switch a few times over the years, which is no biggie either. We have an ancient Stayright pump, which I believe to be the order final from when the house was built in 1996.
Jon in Keaau/HPP
|
« Next Oldest | Next Newest »
|