02-25-2014, 06:45 AM
Used Paloma gas hot water heater, model PH-6DP. Works great.
Unit was built in 1998. Was working fine when upgraded to a bigger water heater. This should work well for a small home with one or two people. Great for adding an outdoor shower as it does not need an electrical outlet. Uses a Piezo igniter to light pilot light. Comes with all the original paperwork and manual.
This is a cut and paste description from the internet:
The Paloma Legacy 6 is the solution you need if you are looking for just a spot of hot water - perhaps some hot water in your project office, horse stable or workshop. The Legacy 6 will deliver you a stream of warm water 70 degrees above inlet temperature at a constant 1.0 GPM. Or it will give you a 100-degree rise at 0.7 GPM.
Combustion remains constant at all times in the Legacy 6 chamber. Instead of modulating combustion, the Legacy 6 adjusts water flow to give you a consistent result.
Because you can turn the pilot off when you don't need hot water, the Legacy 6 is an extremely economical way to deliver hot water to out-of-the-way locations.
High Technology and Quality Design
Wall-mounted Paloma tankless water heaters are built to perform efficiently with very little maintenance. First-class materials include a copper heat exchanger and combustion chamber, brass controls, stainless steel burners, and a hard-baked porcelain exterior. Palomas are easy to service and all parts are easy to replace.
Asking $175.00 or make reasonable offer. Installation available.
982 8950
Royall
Hale O Na Mea Pa`ani
Unit was built in 1998. Was working fine when upgraded to a bigger water heater. This should work well for a small home with one or two people. Great for adding an outdoor shower as it does not need an electrical outlet. Uses a Piezo igniter to light pilot light. Comes with all the original paperwork and manual.
This is a cut and paste description from the internet:
The Paloma Legacy 6 is the solution you need if you are looking for just a spot of hot water - perhaps some hot water in your project office, horse stable or workshop. The Legacy 6 will deliver you a stream of warm water 70 degrees above inlet temperature at a constant 1.0 GPM. Or it will give you a 100-degree rise at 0.7 GPM.
Combustion remains constant at all times in the Legacy 6 chamber. Instead of modulating combustion, the Legacy 6 adjusts water flow to give you a consistent result.
Because you can turn the pilot off when you don't need hot water, the Legacy 6 is an extremely economical way to deliver hot water to out-of-the-way locations.
High Technology and Quality Design
Wall-mounted Paloma tankless water heaters are built to perform efficiently with very little maintenance. First-class materials include a copper heat exchanger and combustion chamber, brass controls, stainless steel burners, and a hard-baked porcelain exterior. Palomas are easy to service and all parts are easy to replace.
Asking $175.00 or make reasonable offer. Installation available.
982 8950
Royall
Hale O Na Mea Pa`ani